Starter package

Kobre®Pond starter pack

The starter pack consists of the following products:
1x Kobre®Pond Algae Killer
1x Kobre®Pond Starter Bacteria
1x Kobre®Pond Sludge Killer

Kobre®Pond Algae Killer
Works effectively against the most common types of algae

Area of application
Excessive algae growth leads to oxygen deficiency and can therefore harm fish and plants. Kobre®Pond Algae Killer is effective against the most common types of algae such as filamentous algae, floating algae and smear algae. Kobre®Pond Algae Killer inhibits the photosynthesis of the algae and causes them to wither away. Suitable for all garden ponds, swimming ponds, ornamental fountains and water basins.

Recommendation for use
Shake well before use. Distribute the care product as evenly as possible in the water. Remove dead algae with a landing net after use. Ensure sufficient oxygen supply. Switch off the UV-C clarifier for at least 7 days during treatment. Avoid changing the water if possible. For optimum results, we recommend regular dosing at approx. four-week intervals.

Dosage
50 ml per 1000 liters of pond water

Kobre®Pond Starter Bacteria

Area of application
Kobre®Pond Starter Bacteria is a high-performance bacteria concentrate with a rapid effect. It quickly brings your filter up to high performance. Especially recommended after a filter restart, in spring or after using medication. Kobre® Pond Starter Bacteria considerably shortens the running-in period of the filter. The starter bacteria support the rapid breakdown of ammonium/ammonia and nitrite.

Important
Switch off UV-C lights during the first five days.

Recommendation for use
Spread the contents of the can evenly over the wet filter material. Restart circulation after approx. 30 minutes. Alternatively, the granules can also be sprinkled into the inlet area of the filter.

Water temperature
Optimum effect from 15°C water temperature

Dosage
Contents for 10000l pond water.

Kobre®Pond Sludge Killer

Area of application
Dead plant residues, leaves, food or fish excrement lead to unsightly and harmful sludge deposits in the pond. This also promotes the growth of algae. There is a constant lack of oxygen in the sludge layer. Sludge can therefore hardly decompose itself. Kobre®Pond Sludge Killer works on a biological basis, with microorganisms and oxygen. This eliminates sludge deposits.

Recommended use
Litter Kobre®Pond Sludge Killer evenly over the silty areas. The granules act locally. If necessary, repeat the application until the desired effect is achieved. Sludge killer is most effective at water temperatures above 15°C. In colder water, sludge decomposition takes longer due to the lower bacterial activity.

Water temperature
Optimum effect from 15°C water temperature

Dosage
500 ml per 10000 liters of pond water. Repeat after approx. 14 days until the desired effect is achieved.

Federal approval number CHZN5602. Use biocide safely and always read the label and product information before use.