Pond Zinger Phosphate Remover

Pond Zinger Phosphate Remover

Using the Pond Zinger

IMPORTANT: The Pond Zinger must be suspended in flowing water to be effective!

1. Remove the Pond Zinger from the packaging and straighten the cord
2. Now roll a section of the net over itself (like a sock)
3. Insert the Pond Zinger and one end of the cord into the rolled-up net
4. Now unroll the end of the net again
5. Center the Pond Zinger and pull the cord all the way to the middle
6. Use the drawstrings at both ends of the net and cut off any
   excess drawstring.
7. Place the Pond Zinger in the water current

Please note:

• The Pond Zinger must be dry before and during any type of storage.
• Store the Pond Zinger in a cool, dark place.
• The color of the Pond Zinger may vary; this is normal
• Wash your hands with soap and water after every contact with the Pond Zinger
• The Pond Zinger is designed for ponds ranging from 2,000 to 4,000 liters. DO NOT use the Pond Zinger in ponds smaller than 2,000 liters!
• An eco-friendly way to keep your pond clear
• Easy to install
• Undissolved parts can be dried and reused later.
• Reduces phosphorus (phosphate) and nutrients by 75% to 85%
• Safe for all pond inhabitants in and around the pond
• Keep out of reach of children. Please seek medical attention immediately if this product is ingested.
• WARNING: Becomes very slippery in water.

Dosage information:

Pond Zinger treats 2,000 to 4,000 liters of pond water. Once the pond is clear, you can remove the Pond Zinger. Allow it to dry completely, then store it in a plastic bag in a dark, cool place until it is needed again. Pond Zinger is intended for use against normal phosphorus levels.
If additional fertilizers or phosphorus enter the pond, an additional dose may be necessary.