OxyActive

Kobre®Pond OxyActiv

Kobre®Pond OxyActiv is deposited on the filamentous algae after sprinkling. Within a very short time, an oxidation process sets in that destroys the cell structure of the algae, e.g. causing them to die. In addition, Kobre®Pond OxyActiv biologically enriches the water with sufficient oxygen. This promotes the healthy decomposition of algae and waste products. Due to the "extra" oxygen, the decomposing bacteria work faster and more effectively. This considerably increases the filter performance.

Application: Litter approx. 100 g of granules per m2 evenly on the water surface. The scattered granules sink and drive algae, thread algae, leaves etc. to the surface of the water. Can then be skimmed off with a net or sweeper. Can be used all year round.
Supplies the pond with additional oxygen. When used as directed, the active solution poses no danger. Do not use at a pH value above 8.5. Use algaecides safely. Always read the label and product information before use. For private and commercial use.

Important: Treat small and shallow ponds in several stages to avoid pH fluctuations.

Federal approval number CHZN 5030.K1. Use biocide safely and always read label and product information before use.

Hazard warning:

Contains: Sodium carbonate in combination with hydrogen peroxide H302 Harmful if swallowed H272 May intensify fire; oxidizer H318 Causes serious eye damage

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. Keep/Store away from clothing/combustible materials. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. Immediately call a POISON CENTER (145) or doctor. In case of fire: Use water to extinguish. Empty and partially empty packaging should be handed over to a collection point for hazardous waste. Keep out of the reach of children.